Shopping cart: no items Checkout


  • SILARUKOV-1 Adjustable Handgripper

    An adjustable handgripper supplied with 3 springs. It can be used with one, two or three springs at a time. This handgripper is good for any level of strength. 

    The handles are closer than usual grippers, so it is very convenient for grip training. You do not need to know how to set the gripper, just take it and crush. 

    This gripper is also good for training fingers separately. 

    ...
    52,00 €
    In stock.
  • SILARUKOV handgripper (30 to 140 kgs)

    This SILARUKOV handgripper is available in 13 strengths: 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140 and 150 kg.

    For your comparison, the 60 kg is similar to CoC #1, the 90 kg is close to CoC #2, the 130 kg is similar to CoC #3. However, the handles are closer, so the closing may feel different. 

    The speciality of this handgrippers is, they are for TNS (the no set) closing. The distance between its handles is varying from 48 to 54 mm (avarage is 50 mm). So even people with...

    21,00 €
    In stock (all strengths)
  • SILARUKOV handgrippers stand (for up to 12 handgrippers)

    This is a stand to keep your handgrippers handy in one place and in a nice order of your choice. Made of steel with powder painting. Holds up to 12 handgrippers at once.

    Price is for 1 stand (handgrippers are not included).

     

    20,00 €
    In stock
  • SILARUKOV handgrippers mini-stand (for up to 6 handgrippers)

    This is a stand to keep your handgrippers handy in one place and in a nice order of your choice. Made of steel with powder painting. Holds up to 12 handgrippers at once.

    Price is for 1 stand (handgrippers are not included).

     

    16,00 €
    In stock
  • Pyramid souvenir: a handgripper 20/30 mm setting block and a handgripper closing

    When grip-sportsmen close handgrippers for times, they often use setting blocks. This setting block by SILARUKOV have two options: 20 mm side and 30 mm side. So you can use it for closing handgrippers from this two distances for times. 

    Also this device has a pyramid resemblish weight plates on a bar or armlifting loading pin with weight plates. It can help you measure the gap to close a handgripper. Of course, this is not a serious measurement device! :) Still, it has 3, 7, 12, 16, 21, 27, 35 and 42 mm in the pyramid. 

    ...
    8,00 €
    In stock
  • 20x30 mm Setting Block (for closing handgrippers)

    A setting block is used in closing handgrippers from a particular distance. Usually it is from 20 or 30 mm. 

    4,00 €
    Out of stock.
  • Bruce Lee Grip Machine by SILARUKOV

    Bruce Lee Grip Training Machine is used in training and strengthening your fingers, hands and forearms.

    This improved model has additional handles for parallel grip. The starting distance between handles is 90 mm. Then you can adjust the distance according to your training goals from 20 to 70 mm (you can set the distance at 20, 30, 40, 50, 60, 70 mm with a special setting nails).

    According to some open source information, this training tool was invented and used by Bruce Lee, famous kung-fu fighter and movie star.

    The size characteristics: hight - 56 cm, width - 55 cm, depth - 20 cm (not including loading plates), loading plates pin is 29 cm high and 25 mm in diameter (any plate will fit here: 25 mm, 30 mm or 50 mm, olympic size). Maximus plate diameter is 47 cm. Maximum plates that the machine can hold is about 150 kg. The weight of the tool...

    85,00 €
    In stock.
  • SILARUKOV Telegraph Key Pinch Training Tool (version 02)
    This grip training tool will help you develop strong grip, strong fingers, good pinch skills. This device is used in training either all fingers at once, or each finger separately, including thumb. 
     
    You can use any weight plates, the loading pin is enough for several plates. 
     
    Made in Russia. Weight 2.5 kg. 
     
    Please see the following video on how to use this tool:
     
     

    49,00 €
    In stock
  • DK-140e

    This is a device which shows your grip strength. It has electronic display. Made in Russia.

    The shipping cost to European Union is 27 Euros. 

    60,00 €
    In stock.
  • Silarukov PARALLEL adjustable hand gripper

    Good training tool for improving final stage of closing hard hand grippers. Distance between handles is 18-19 mm. See the strength table in the product photo section.

    50,00 €
    In stock.
  • The Russian Bullet Set (Silarukov hand gripper with limiters + Russian bullet wi

    This is a set of tools for World Armlifting Association "Russian Bullet" discipline. 

    The handgripper has 2 cantimeters longer handles, then limiters, then more handles for holding the bullet. This is comfortable for the hand of all sizes + does not allow one to use any known cheating techniques. 

    The Russian bullet is held by the lower part for the handgripper below the limiters. 

    IMPORTANT NOTE: The rules for the Russian Bullet are not published yet by World Armlifting Association (as of May 29, 2017), however, please consider the following two points as how to hold the bullet right. The handgripper has two limiters (one is smaller and the other is bigger). You need to put bigger limiter to your hand and the smaller limiter is for the fingers side. The hand should be above the limiter. The handgripper is specially...

    40,00 €
    In stock.
  • SILARUKOV-3 Adjustable Handgripper (adjustable resistance and distance between h

    A new version of November 2017 of an adjustable handgripper supplied with 2 springs. It can be used with one or two springs at a time. This handgripper is good for any level of strength. 

    The distance between handles is 71 mm and it can be adjusted as you like. The minimum distance you can make is 15 mm. 

    The weight of the hand gripper is 1 kg.

    ...
    65,00 €
    In stock
  • Pinch Trainer (a setting for a handgripper)

    This device is used together with handgrippers for training the pinch grip.

    A handgripper is not included.  

    18,00 €
    In stock.