Shopping cart: no items Checkout

The SILARUKOV Block Simulator for an armwrestling table



The SILARUKOV Block Simulator for an armwrestling table

Out of stock.


PURPOSE AND FEATURES:
 
The block attachment to the arm wrestling table can be used with tables of any manufacturer with a standard arrangement of holes for pillows and armrests. Also, the holes in the mounting plate are expanded, so that they should be suitable for tables from different manufacturers.
 
It is possible to mount the device both along and across the table.
 
Also note that it is possible to change the position of the vertical rack without using a tool, it moves smoothly along the horizontal attachment to the table. You can put a vertical stand in the center of the table or move it to the left or to the right during training easily, simply and quickly.
 
The height of the vertical rack can be changed literally in 10-20 seconds (depending on your orientation), you only need to unscrew one fastener with your hands (without a tool), change the height and fix it with the same fastener easily, quickly, conveniently.
 
The wheels are mounted on top of a movable freely-rotating bearing mount, which allows you to change the angles of attack during training. The mount will orient itself and copy your movement in the right direction.
 
EQUIPMENT:
 
Option 1 (basic configuration):
 
A set of Block-console with a table, with two mounting bolts to the table, a metal cord in a plastic braid, an S-shaped mount, a chain (allows you to adjust the height).
 
Option 2 (Base + vertical neck 25 mm):
 
In addition to the basic configuration, this includes a vertical neck for pancakes with a hole of 26 mm (you can also use it with a hole of 30 m).
 
Option 3 (Base + vertical neck 50 mm):
 
In addition to the basic configuration, this includes a vertical neck for pancakes with a hole of 51 mm (Olympic standard).
 
IMPORTANT: The armwrestling handles are not included in any of the complete sets, they are purchased additionally in the Arm Wrestling section. A wrench is not included either. You will need a wrench to assemble the block. 
 
________________________
 
The weight of the block is 7.6 kg
 
The length of the cable is 99 cm.
 
The chain length is 64 cm.
 
The material is metal.
 
Permissible load on the simulator: up to 100 kg.
 
__________________________
 
Approximate shipping rates for Basic Equipment (8 kg including packaging): 
 
To Europe: EUR 55
To the UK: EUR 70
To the USA: EUR 85 
 
Adding the pin to the basic equipment will add about 10-15% to the shipping cost. 
 
The exact shipping rate will be calculated after your order and you will see it in your PayPal invoice. If the amount is not acceptable for you, please let me know. 
 
Please check the video below: 
 

190,00 €

SILARUKOV recommendation. Please also see the following items: