This SILARUKOV handgripper is available in 13 strengths: 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140 and 150 kg.

For your comparison, the 60 kg is similar to CoC #1, the 90 kg is close to CoC #2, the 130 kg is similar to CoC #3. However, the handles are closer, so the closing may feel different. 

The speciality of this handgrippers is, they are for TNS (the no set) closing. The distance between its handles is varying from 48 to 54 mm (avarage is 50 mm). So even people with...

Handle for armwrestling training. Two changeable handles. The carabiner can be moved to three different positions to target different fingers. 

Handle no. 1:  a 60 mm diameter cylinder. 

Handle no. 2: a cone 30 to 60 mm diameter.

The item is made of metal. The handles are made of caprolon.

Handle for armwrestling training. Three changeable handles. The carabiner can be moved to three different positions to target different fingers. 

Handle no. 1: an eccentric handle. 

Handle no. 2:  a 60 mm diameter cylinder. 

Handle no. 3: a cone 30 to 60 mm diameter.

Silarukov Armwrestling training handle (on the bearing) weighs 1.4 kg and includes a 10 mm carabiner. 

The handle's diameter is 60 mm and it has nice knurling on the surface. 

The handle is made of steel and is a great armwrestling training tool. 

Silarukov Armwrestling training handle (on the bearing) weighs 1.2 kg and includes a 10 mm carabiner. 

The handle's diameter is 40 mm and it has nice knurling on the surface. 

The handle is made of steel and is a great armwrestling training tool. 

Note: There...

Attention: this is a caprolon eccentric handle without U-shaped handle. It is mainly meant for those who have earlier bought a Silarukov U-shape handle, but with other changeable handles (like cone and cylinder). 

Note: This product can also be bought with the U-shaped handle or with U-shaped handle and two other handles (cone and cylinder). Please check our Armwrestling section on the website to see all the possible options. 

This 50 mm armwrestling strap handle is used together with block weights exerciser or with rubber resistance bands. Used in the trainings of armwrestlers. Supplied with carabiner. There are also other diameters of the strap handles: 40 and 60 mm (ordered separately).

This device is used together with handgrippers for training the pinch grip.

A handgripper is not included.  

An adjustable handgripper supplied with 3 springs. It can be used with one, two or three springs at a time. This handgripper is good for any level of strength. 

The handles are closer than usual grippers, so it is very convenient for grip training. You do not need to know how to set the gripper, just take it and crush. 

This gripper is also good for training fingers separately. 

This is a set of tools for World Armlifting Association "Russian Bullet" discipline. 

The handgripper has 2 cantimeters longer handles, then limiters, then more handles for holding the bullet. This is comfortable for the hand of all sizes + does not allow one to use any known cheating techniques. 

The Russian bullet is held by the lower part for the handgripper below the limiters. 

IMPORTANT NOTE: The rules for the Russian Bullet are not published yet by World Armlifting Association (as of May 29, 2017), however, please consider the following two points as how to hold the bullet right. The handgripper has two limiters (one is smaller and the other is bigger). You need to put bigger limiter to your hand and the smaller limiter is for the fingers side. The hand should be above the limiter. The handgripper is specially...

This is a SILARUKOV logo branded T-shirt. Both front side and back side have a Silarukov logo on them. 

Available sizes are M, L. 

T-shirt is white. Logo is white and blue. 

The set of three SILARUKOV armwrestling strap handles with various handle diameter: 40, 50, 60 mm. Factual diameter is 0,5 - 2,5 mm more due to adding the knurling to the tubes.

This SILARUKOV eccentric dumbbell is used in training of wrists and forearms.

Many armwrestlers like this exercise. The exercise is you lift the dumbbell with the weight up from you, this way the weight tries to put your wrist down, but you need to squeeze the handle and keep it horizontal to the ground surface. The dumbbell can also be in vertical position, this way the wrist gets another vertical loading.  

The plates to be purchased seperately. The loading rod is 25 mm, so the plate needs to have 26 mm hole.

Price is for one dumbbell without plates. Two spring collars are included. 

Please also view the video below to better understand how this eccentric dumbbell can be used in your training:

Vertical plate loading pin is used in armlifting along with rolling hands, pinch blocks, hubs, etc. The pin is loading with plates, minimum diameter of hole is 26 mm.

The pin is supplied with carabiner. Weight plates are bought seperately. 

Diameter is 25 mm. Height is 33 cm (without carabiner). 

Price for 1 item with carabiner. 

The color of the stand is now BLUE. This is a stand to keep your handgrippers handy in one place and in a nice order of your choice. Made of steel with powder painting. Holds up to 12 handgrippers at once.

Price is for 1 stand (handgrippers are not included).

When grip-sportsmen close handgrippers for times, they often use setting blocks. This setting block by SILARUKOV have two options: 20 mm side and 30 mm side. So you can use it for closing handgrippers from this two distances for times. 

Also this device has a pyramid resemblish weight plates on a bar or armlifting loading pin with weight plates. It can help you measure the gap to close a handgripper. Of course, this is not a serious measurement device! :) Still, it has 3, 7, 12, 16, 21, 27, 35 and 42 mm in the pyramid. 

This is a 6 mm thick SILARUKOV Pinch Block. It has been designed to work by squeezing it and lifting weight. This works your pinch strength and grip.

You can do lifts with one hand or both hands (double hand pinch).

The pinch block is attached using the carabiner and the chain or the vertical plate pin (to be purchased separately).

This product has been approved and certified by World of Grip of David Horne. Rules and records are at www.davidhorne-gripmaster.com/worldrecords.html

This is a 80 mm thick SILARUKOV Pinch Block. It has been designed to work by squeezing it and lifting weight. This works your pinch strength and grip.

You can do lifts with one hand or both hands (double hand pinch).

The pinch block is attached using the carabiner and the chain or the vertical plate pin (to be purchased separately).